Multi Servo Tester 3CH - ESC
Internal Reference:
SERVO.TESTER
Description
The device also can be used as a signal generator for an electric speed controller (ESC), and then you can test your motor system without using a transmitter and receiver.
There are 3 modes to check servos or ESC:
- Manual mode: turn the knob at a different speed, and check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic "window wiper" mode: make the servo swing like a window wiper in the biggest angle.
Features
- It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
- You can also connect 1-3 ESC to test and compare their reaction time respectively.
- It can connect 3 servos of the CCPM helicopters and select servos.
- It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.
- Voltage: 4.5 - 6.0 Vdc
- Size: 48 x 32 x 14mm
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.