DC Voltage Sensor Module (SKU#VS.DC1)
Voltage Detector Divider
Internal Reference:
KIT.VS.DC.I
Description
The voltage detection module is based on the principle of the resistor divider. The measured voltage can be reduced so that the ADC pin for the Arduino board can detect the voltage value after reduction, and the measured voltage can be calculated. Sampling resistors which are precision resistors, a precision of 0.5% and a temperature coefficient of 50PPM, to effectively ensure the detection accuracy.
Features
- Measurement Accuracy<= 1%
- Measurement range up to 25 VDC
- Easy to use
- Standard electronic building blocks Interface
- M2 screw mounting holes for easy installation
- Size: 25 x 25 mm
Note: Range <= ADC reference voltage / 0.18
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.