MSO2202-S UNI-T Mixed Signal Oscilloscope 200 MHz with 2 Analog + 16 Digital Channels and Built-in Function / Arbitrary Waveform Generator

UNI-T MSO2202-S Mixed Signal Oscilloscope (200 MHz, 2CH + 16 Digital, AWG)

The UNI-T MSO2202-S is a high-performance mixed signal oscilloscope combining a 200 MHz digital phosphor oscilloscope, 16-channel logic analyzer, and a dual-channel 50 MHz arbitrary waveform generator in one powerful platform.

Built on UNI-T’s Ultra Phosphor™ technology, it delivers ultra-fast waveform capture, deep memory, advanced triggering, and professional protocol decoding—ideal for R&D, embedded systems, power electronics, automotive electronics, and education.

Key Features

• 200 MHz bandwidth
• 2 analog channels + 16 digital channels
• Real-time sampling rate up to 2 GSa/s
• Deep memory: 56 Mpts per channel
• Ultra-high waveform capture rate: up to 1,000,000 wfms/s
• 8-inch capacitive touch display (800 × 480)
• Ultra Phosphor™ display with 256-level grayscale
• Built-in dual-channel 50 MHz function / arbitrary waveform generator
• Bode plot loop analysis (software option)
• Hardware real-time waveform recording up to 120,000 frames
• Advanced trigger system including zone trigger
• Full-memory hardware protocol decoding
• Built-in True RMS DVM
• Web-based remote control
• SCPI programmable commands

Core Technical Specifications – MSO2202-S

Analog Performance

• Bandwidth: 200 MHz (–3 dB)
• Channels: 2 analog
• Rise Time (typical): ≤ 1.8 ns
• Sampling Rate:
  • 2 GSa/s (half-channel interleaved)
  • 1 GSa/s (all channels)
• Vertical Resolution: 8-bit
• Vertical Scale: 500 µV/div to 20 V/div
• Input Impedance:
  • 1 MΩ ±2% || 16 pF ±3 pF
  • 50 Ω ±1.5%
• Maximum Input Voltage: 400 V (DC + peak)
• Bandwidth Limit: 20 MHz (typical)

Digital (Logic Analyzer)

• Digital Channels: 16
• Sampling Rate: 1 GSa/s
• Memory Depth: up to 56 Mpts
• Thresholds: TTL, CMOS (5 V / 3.3 V / 2.5 V / 1.8 V), ECL, LVDS, Custom
• Minimum Detectable Pulse Width: 2 ns

Acquisition & Memory

• Memory Depth:
  Analog & Digital: Automatic, 7 kpts → 56 Mpts
• Waveform Capture Rate:
  • 200,000 wfms/s (Normal)
  • 1,000,000 wfms/s (Fast Acquire)
• Hardware Recording: up to 120,000 frames

Display

• Screen: 8-inch TFT capacitive touch
• Resolution: 800 × 480
• Color Depth: 24-bit true color
• Persistence: 50 ms → Infinite
• Multi-Scopes: independent split-screen viewing

Trigger System

• Trigger Modes: Auto, Normal, Single
• Trigger Types:
  Edge, Pulse, Runt, Window, Nth Edge, Delay, Timeout, Duration, Setup/Hold, Slope, Video, Pattern
• Zone Trigger: Supported
• Serial Bus Triggering:
  RS-232 / UART, I²C, SPI, CAN, CAN-FD, LIN, FlexRay (options)

Measurements & Analysis

• Automatic Measurements: 36 waveform parameters
• Cursor Measurements: ΔV, ΔT, frequency, phase
• Frequency Counter: 7-bit hardware counter (per channel)
• Math Functions: +, −, ×, ÷, FFT, filters, logic
• FFT:
  • Up to 4 M points
  • Waterfall display
• DVM: Multi-channel AC / DC True RMS

Built-in AWG (MSO-S models)

• Channels: 2
• Max Output Frequency: 50 MHz
• Sampling Rate: 250 MSa/s
• Vertical Resolution: 16-bit
• Waveforms:
  Sine, Square, Ramp, Pulse, Noise, DC, Arbitrary
• Modulation: AM, FM
• Bode Plot Source: Supported

Interfaces & Connectivity

• USB Host
• USB Device
• LAN (Ethernet)
• EXT Trigger
• AUX Out (Trigger / Pass-Fail)
• AWG Output
• VGA Output
• Web control via browser
• SCPI remote programming

General Specifications

• Power Supply: 100–240 VAC ±10%, 50/60 Hz
• Power Consumption: ≤ 100 VA
• Cooling: Forced-air fan
• Operating Temperature: 0 °C to +40 °C
• Dimensions (W × H × D): 370 × 185 × 115 mm
• Weight: 4.5 kg
• Calibration Interval: 1 year
• Certifications: CE, UKCA, cETLus

Standard Accessories

• Power cord
• USB data cable (UT-D14)
• 2 × passive probes (200 MHz)
• Logic analyzer probe (UT-M15)
• BNC-BNC cable & alligator clip cable (MSO-S models)
• User documentation

Typical Applications

• Embedded system development
• Digital & analog mixed-signal debugging
• Power electronics & SMPS analysis
• Automotive electronics
• Protocol analysis (UART, I²C, SPI, CAN, LIN, etc.)
• R&D laboratories and education
• Production testing & troubleshooting

Summary

The UNI-T MSO2202-S is a true all-in-one mixed-signal test platform, combining 200 MHz oscilloscope, logic analyzer, and 50 MHz AWG with deep memory, ultra-fast capture, and advanced protocol tools—making it an excellent choice for professional electronics development and diagnostics.

Download

• ​PRODUCT PAGE & USER MANUAL​
• Explore Premium Oscilloscopes from UNI-T - Now available at RAM Electronics.