ATTEN MS-900 4 in 1 Rework Station

1 Year Warranty
Free Technical Support

45,000.00 EGP 45000.0 EGP 45,000.00 EGP 55,000.00 EGP

45,000.00 EGP 55,000.00 EGP

Not Available For Sale

This combination does not exist.

 Pick up from RAM Store
 Shipping: 2-3 Business Days

Internal Reference: ATTEN.MS900.4IN1


  • 4 in 1 intelligent rework station with LCD display.
  • High-accuracy MCU control is employed to synchronously detect 3 tool channels that can be used independently and synchronously without mutual interference.
  • Built-in vacuum generator.
  • Max power is 900W.
  • Support doing multiple desoldering tasks simultaneously.
  • Automatically identify all kinds of soldering tools and load corresponding parameters.
  • Adjust the temperature by software automatically, more accurate and convenient.
  • Fault display and alarm function.
  • Equipped with a vacuum suction pen, components can be extracted after desoldering.
  • Auto standby and sleep function conserves energy and protects equipment.
  • Password-protected function to preserve settings.
  • Built-in RS-232 communication interface, support computer control.


1- Hot air gun, soldering iron, desoldering gun, electric tweezers, and suction pen in one station.

2- Support 3 channels working. Tools will be identified automatically and loading of corresponding parameters.


Short press key 1/2/3 to select channel 1/2/3; long press to turn it on/off.
Adjust the temperature value by pressing “▲” or “▼”, long press can be quickly adjusted.

3- Beep Alarm Function

When the station is power off, long press “▲” and “▼” key and turn on the power switch to turn on/off tone.

4- ℃/℉ available

When the station is powered off, long press and turn on the power switch to change ℃/℉.

5- Temperature calibration

Short press key 1/2/3 to select channel 1/2/3, press  and key 1/2/3 for more than 3 seconds to enter into temperature calibration mode. Press “▲”or“▼” key to input temperature calibration value ±50℃/90℉.

6- Auto-sleep function, sleep time setting.

After temperature calibration setting, it will directly enter into sleep time setting. Press “▲”or“▼” key to input sleep time 1-120mins. (default 0min, no sleep.)

7- PC Software Control System

The PC software can be used under the following operating system: win XP, win 7, win 10.