FNIRSI DSO-TC3 Oscilloscope Multifunction Electronic Component Tester 3 in 1

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions that are skillfully integrated. 

It is equipped with a 2.4-inch color TFT display, a built-in rechargeable lithium battery, bringing users stronger and more practical functions with good portability.

Main Features:

• 3 In 1 Function: This product integrates digital oscilloscope, transistor tester and signal generator functions into one machine.
• Digital Oscilloscope Function: With the real-time sampling rate of 10MS/s and bandwidth of 500Khz. Support maximum measurement of 400V voltage signal. With complete trigger function (automatic, single, regular). Equipped with an efficient button AUTO.
• Transistor Tester Function: Automatically identify and measure various transistors, including NPN and PNP triode, N-channel and P-channel metal oxide-semiconductor field effect transistor, JFET, diodes, double diodes, thyristors,as well as resistors, inductors, capacitors, field-effect transistor, etc. passive component. Auto-detect pin definitions.
• Signal Generator Function: 6 kinds of signal waveforms: sinewave, pulsewave, trianglewave, rampwave, direct current. 1-100KHz adjustable output frequency. 3.3V adjustable output voltage. 0-100% adjustable output duty ratio.
• Tool Box Function: Automatically analyze specific Protocol infrared code. Other function modes: including circuit continuity test, 0-40V input voltage measurement, PWM output, 0-32V diode measurement, temperature and humidity sensors measurement, etc.
• 2.4inch Digital TFT Display: TFT color screen, high resolution display with LED backlight, with bright colors and high contrast.
• High Accuracy: Infrared decoding design, quick response, accurate capture of highly sensitive response signal, fast and accurate measurement with small error.
• Rich and Powerful Features: One button for automatic adjustment, support for free switch, support intelligent fire preventions.
• Long Endurance: Built-in 1500mAh high-capacity rechargeable polymer lithium battery, long lasting lifespan, Type-C interface, continuous power supplys without isolation transformer, safer to use.
• Folding Bracket: Comes with invisible bracket, integrated folding, stable placement, free your hands, does not occupy too much space.
• Wide Applications: Suitable for mcu debugging, car repairing, home appliance repairing, DIY electronic competition, power-supply debugging, inverter, etc.

Specifications:

• Display: 2.4 inches TFT color screen
• Battery: Built-in 1500mah rechargeable lithium battery (included)
• Charging interface: USB Type-C, +5V
• Digital Oscilloscope: 10MSa/s
• Real-time sample rate: 500Khz
• Analog Bandwidth: 1ΜΩ
• Input resistance: Alternating Current/Direct Current
• Coupling method: 400V
• Test voltage ranges: 10mV-10V
• Vertical Sensitivity (x1): 1us-10s
• Horizontal time base ranges:
• Trigger mode: Auto / Normal / Single
• Trigger type: Rising edges / Falling edges
• Waveform Freeze: Yes
• Automatic measurement: Yes
  
• Transistor Tester:
• Capacitor: 25pF~100mF
• Resistor: 0.01Ω ~ 50ΜΩ
• Inductor: 10uH~1000uH
• Battery: 0.1~4.5V
• Input voltage: 0~40V
• DS18B20: 0-85℃
• DHT1: 0-60°C/5-95%
  
• Signal Generator:
• Sinewave: 1-10KHz/0-3.3V/50%
• SQW: 1-100KHz/3.3V/50%
• Pulsewave: 1-100KHz/3.3V/0-100%
• Trianglewave: 1-10KHz/0-3.3V/50%
• Ramp: 1-10KHz/0-3.3V/0-100%
• Direct current: 0-3.3V




Packing List (Upgraded):

• 1 * 3in1 Digital Oscilloscope
• 1 * Adaptor
• 1 * Probe
• 1 * High Pressure Probe
• 3 * Test Hook
• 1 * Type-C Cable
• 1 * Manual




Download

DATASHEET